A 4.0 x 3.0 x 2.7 m Mini A-Frame Bouncy Castle Red Blue with six printed panel sets, a 1.0 HP blower and a 72 kg shell. The packed case measures 120 x 77 x 60 cm and holds the blower, stakes, repair kit and manual. The 17 oz shell is flame retardant to NFPA 701-2, and two adults set the unit up in about 15 minutes.
Mini A-Frame Bouncy Castle Red Blue from Leisure Activities®, a China manufacturer, is built around a 2.7 m roofline and a 4.0 x 3.0 m floor. It clears village-hall beams and domestic ceilings, and it leaves a walkway on two sides of a terraced garden. The 120 cm packed case passes a standard side gate. Inside, one bed runs from a stepped entry to a low wall line, with netted panels on three sides.
01
Product Features
The unit is a single-chamber castle with a pitched roof, a stepped entry and netted panels on three sides. The 2.7 m roofline keeps it under most domestic ceilings and hall beams, while the 4.0 x 3.0 m floor fits a lawn, a patio or a small hall.
Six printed panel sets ship with the unit, so the same shell covers a birthday, a nursery event or a school fete. The blower, stakes, repair kit and manual travel in the same case.
Item
Specification
Inflated size (L x W x H)
4.0 x 3.0 x 2.7 m / 13 x 10 x 9 ft
Unit weight
72 kg / 159 lb
Packed size
120 x 77 x 60 cm / 47 x 30 x 24 in
Outer material
17 oz PVC tarpaulin, NFPA 701-2
Internal material
9 oz PVC, 8P phthalate-free
Play area
Single bounce bed with stepped entry
Panels
Six printed sets, hook-and-loop
Blower
1.0 HP constant air, voltage to order
Tube
100 mm blower tube
Anchor points
Webbing loops, corners and mid-span
Assembly crew
Two adults, about 15 minutes
Packed with
Blower, stakes, repair kit, manual
Optional
Spare panel, sandbag set, printed banner
MOQ / lead time
1 piece / 30 days standard
Warranty
1 year limited on seams, blower 1 year
02
Panel Themes
The front panel of Mini A-Frame Bouncy Castle Red Blue fixes with hook-and-loop, so the shell stays on the van and only the printed skin changes. A changeover takes about five minutes with no tools, and the six themes cover the bookings most hire fleets take.
Each theme is printed to the panel rather than applied as a sticker, so the artwork does not peel at the corners after a season of folding.
Theme
Typical booking
Panel note
Unicorn
Birthday parties, ages 4-8
Pale print, bag separately
Zoo
Nursery and school events
Animal print, high contrast
Garage
Boys' parties, ages 5-9
Dark print hides scuffs
Jurassic
Dinosaur themes
Green print, large figures
Under the sea
Pool and beach events
Blue print, fades slowest
Princess
Girls' parties, ages 4-8
Pink print, light tone
03
Factory Profile
The factory sits on a 70-acre site in Jiaozhou, Qingdao, with 12,000 m² of workshops under one roof line. Cutting, printing, welding, sewing, inspection and packing run in sequence, and more than 100 heavy-duty sewing machines support a monthly output of about 1,000 units. A team of over 170 staff covers the line.
Material storage, semi-finished goods, finished inspection and export packing each have a dedicated bay, so a re-order follows the same route as the first batch.
04
Certificates and Materials
Units are built under ISO 9001, ISO 14001 and ISO 45001 management systems. The 17 oz outer and 9 oz lining are tested to NFPA 701 method 2 and screened for the eight restricted phthalates, and the shell meets EN 14960-1:2019.
An SCT product certificate and an RPII inspector report can travel with the shipment, together with the EN compliance file. Documents are issued against the serial number on the data plate, so a hirer can match a unit to its paperwork.
05
Export Packing
The bag is 120 x 77 x 60 cm and moves on a sack barrow; two people lift it over a step. The blower travels in its own carton, and the stakes and repair kit sit in a labelled accessory bag.
Cases of the Mini A-Frame Bouncy Castle Red Blue are consolidated in Qingdao, and the loading plan is quoted from the actual case sizes. A loading photo and the packing list go out with the shipping documents.
06
Site Setup
Two adults set the unit up in about 15 minutes: unroll, fit the tube, inflate, anchor, wipe the bed and check the netting. The blower sits at the entry end, with the cable run under a mat or behind the unit.
Webbing loops on the base skirt are the only anchor points. On grass every loop takes a stake; on paving, decking or a hall floor, sandbags or water ballast replace the stakes.
Get A Quote Now — send the panel theme, the voltage and the plug type, and we reply with the quotation and packing list.
07
Questions Buyers Ask
Q: Which documents ship with the Mini A-Frame Bouncy Castle Red Blue?
A: The EN 14960-1:2019 compliance file, the SCT product certificate and the RPII inspector report, issued against the serial number.
Q: Can we book a factory audit before the order?
A: Yes. Audits are scheduled at the Jiaozhou site, and the ISO 9001, 14001 and 45001 certificates are sent in advance.
Q: How long does a printed panel take?
A: 45 to 60 days from approved artwork, because the panel is printed to order rather than pulled from stock.
Q: Which voltages are available for the blower?
A: A 220-240 V / 50 Hz blower or a 110 V / 60 Hz one; the plug is supplied to suit the destination.
Q: What is covered by the warranty?
A: Twelve months on seams and workmanship; the blower carries its own twelve-month cover. Wear from use and damage from stakes or glass are outside the warranty.
Send us your detailed inquiry about Inflatable Bouncy Castles,Inflatable Sports Games,Inflatables Accessories, wholesale orders, customized projects or OEM requirements. Our professional team will reply with quotation and solution quickly.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy