Leisure Activities® offers the Large Unicorn Rainbow Bouncy Castle for wholesale purchase, featuring a 5.2 × 4.3 m single-chamber layout with three-dimensional internal pop-ups and a rainbow-striped bouncing bed. The 4.9 m-high structure uses 17 oz PVC vinyl with a 9 oz internal lining, while reinforced pop-up bases and quadruple stitching at impact zones support repeated commercial use.
Large Unicorn Rainbow Bouncy Castle from Leisure Activities® is designed for indoor and outdoor play venues seeking an enclosed bouncing area with integrated obstacles rather than a conventional open-floor castle. Three-dimensional pop-ups divide the interior into multiple play sections, creating different movement paths across the rainbow-printed bed.
01
Key Features
The unit is a single-chamber castle with a rainbow-striped bed, printed inner walls and three-dimensional pop-ups inside the play area. The 5.2 x 4.3 m floor and 4.9 m roofline give it the height of a large castle without a slide.
The bed is printed in bands that line up across the panel joints, and the inner walls carry the same theme so it reads from inside as well as from the entrance.
Item
Specification
Inflated size (L x W x H)
5.2 x 4.3 x 4.9 m / 17 x 14 x 16 ft
Unit weight
110 kg / 243 lb
Packed size
140 x 85 x 55 cm / 55 x 33 x 22 in
Main material
17 oz PVC vinyl, NFPA 701-2
Internal material
9 oz PVC lining, not Oxford cloth
Play bed
Rainbow-striped print, single chamber
Internal features
Three stitched pop-up volumes
Stitching
Quadruple stitch at impact zones
Blower
1.0 HP constant air, voltage to order
Anchor points
Webbing loops, corners and mid-span
Assembly crew
Two to three people, about 25 minutes
Packed with
Blower, stakes, repair kit, manual
Optional
Sandbag set, spare pop-up, re-theme panel set
MOQ / lead time
1 piece / 30 days, 45-60 days custom print
Warranty
1 year limited on seams, blower 1 year
02
Pop-Up Construction
On the Large Unicorn Rainbow Bouncy Castle each pop-up is a separate stitched section fixed to the bed. The base patch spreads the load into the floor, and the volume can be replaced without retiring the bed.
The pop-ups divide the chamber into routes rather than one open floor, which changes how a group moves through the unit compared with a plain castle.
Element
Function
Check point
Pop-ups
Play volumes inside the chamber
Base patch and seams
Rainbow bed
Printed play surface
Centre-line print wear
Inner walls
Theme inside the chamber
Scuffs at hand height
Entry lip
Reinforced step-in
Quadruple stitch
Netting
Visibility for parents
Tension and threads
03
Inside the Workshop
The workshop is laid out so a printed panel never doubles back: cutting, printing, welding, sewing, inspection and packing sit in one sequence across 12,000 m².
The 70-acre site runs with over 170 staff and more than 100 heavy-duty sewing machines, at about 1,000 units a month. The pop-ups are inflated on a test rig before packing, so a twisted volume is caught at the factory rather than on site.
04
Test Reports
Every unit can be shipped with a document set: EN 14960-1:2019 compliance, SCT product certificate, RPII inspector report, and ISO 9001, ISO 14001 and ISO 45001 certificates.
The PVC carries NFPA 701 method 2 and 8P phthalate test documentation. The impact seams and pop-up base patches are the points the inspector records, and the report follows the serial number.
05
Packing for Print Protection
At 110 kg the case needs two people. The pop-up sections are packed on top of the roll so they are not compressed, and the bag is labelled with the print code.
Print faces are separated by a foam sheet, and the canopy and bed are rolled print-side inward. The packed case is 140 x 85 x 55 cm, which loads through a standard van door.
06
Re-Theme Options
The unicorn set is one print file. A venue or retailer can re-theme with a printed panel set while the shell stays the same, which is cheaper than a second unit.
The print proof is checked in daylight before the run, and a licensed character needs a written licence reference with the file.
Get A Quote Now — send the panel theme, the voltage and the access width, and we reply with the quotation and packing details.
07
Pop-Up and Print Questions
Q: Which certificates come with the Large Unicorn Rainbow Bouncy Castle?
A: EN 14960-1:2019, SCT, the RPII inspection report, the three ISO certificates, and the NFPA 701-2 and 8P test documents.
Q: Does the unit have a slide?
A: No. It is a single chamber with internal pop-ups; buyers who need a slide pair it with a multiplay unit.
Q: Can the pop-ups be replaced individually?
A: Yes. Each pop-up is a separate stitched volume, and a replacement is quoted against the serial number.
Q: How long does a re-theme panel take?
A: About 30 days from approved artwork for a panel set, or 45 to 60 days when the pop-ups also change colour.
Q: Which voltage does the blower use?
A: The blower is built for 220-240 V / 50 Hz or 110 V / 60 Hz, and the plug is confirmed with the order.
Send us your detailed inquiry about Inflatable Bouncy Castles,Inflatable Sports Games,Inflatables Accessories, wholesale orders, customized projects or OEM requirements. Our professional team will reply with quotation and solution quickly.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy