Products
Small Jungle Party Multiplay Bounce Castle
  • Small Jungle Party Multiplay Bounce CastleSmall Jungle Party Multiplay Bounce Castle
  • Small Jungle Party Multiplay Bounce CastleSmall Jungle Party Multiplay Bounce Castle

Small Jungle Party Multiplay Bounce Castle

Leisure Activities® supplies the Small Jungle Party Multiplay Bounce Castle for commercial sourcing, with a space-efficient 5.8 × 3.0 m layout that combines a bounce bed, climbing steps and a 1.4 m slide. Its 79 kg construction and 103 × 80 × 58 cm packed case make it suitable for rental operators serving residential gardens, community halls and smaller event venues.

Leisure Activities® Small Jungle Party Multiplay Bounce Castle is designed for venues where available ground space, access width and equipment handling influence inflatable selection.

Small Jungle Party Multiplay Bounce Castle
01

Compact Features

The unit combines a bounce bed, moulded climb steps and a single-lane slide in a 5.8 x 3.0 m footprint. The 2.7 m height clears most domestic ceilings and village-hall beams, and the 79 kg shell moves on a sack barrow.

The entry and the slide exit sit at opposite ends of the unit, which keeps the play path one-way without a barrier. The wall carries animal graphics on the outside and netting on three sides.

Item Specification
Inflated size (L x W x H) 5.8 x 3.0 x 2.7 m / 19 x 10 x 9 ft
Unit weight 79 kg / 174 lb
Packed size 103 x 80 x 58 cm / 41 x 31 x 23 in
Outer material 17 oz PVC vinyl, NFPA 701-2
Internal material 9 oz PVC, not Oxford cloth
Play elements Bounce bed, climb steps, single-lane slide
Platform height 1.4 m / 55 in
Theme Jungle print with animal graphics
Blower 1.0-1.5 HP constant air, voltage to order
Anchor points Webbing loops, corners and mid-span
Assembly crew Two adults, about 15 minutes
Packed with Blower, stakes, repair kit, manual
Optional Sandbag set, spare slide panel, extra print set
MOQ / lead time 1 piece / 30 days standard
Warranty 1 year limited on seams, blower 1 year
02

Long-Footprint Layout

On the Small Jungle Party Multiplay Bounce Castle the climb steps are moulded into the side wall and lead to a 1.4 m platform. The slide is a single lane, and the exit carries a double lip with replaceable edging.

The platform edge has a reinforced strip where feet land. The slide face is printed, and the print runs from the steps across the platform so the theme does not break at the join.

Task Time Crew
Unroll and position 3 minutes Two adults
Fit tube and inflate 5 minutes Two adults
Anchor the loops 4 minutes Two adults
Wipe and check 3 minutes Two adults
03

Factory and Capacity

The line is sized for repeat orders. The 70-acre site holds 12,000 m² of workshops, 100-plus heavy sewing machines and a workforce of over 170, with a monthly output near 1,000 inflatables.

Raw material, semi-finished goods, inspection and export packing each have a dedicated bay. A repeat order is cut from the same panel files, so the print matches the first shell.

Factory
04

Standards and Certification

Compliance documents travel with the goods: EN 14960-1:2019, an SCT product certificate, an RPII inspector report and the ISO 9001, 14001 and 45001 certificates.

The shell material is tested to NFPA 701 method 2 and screened for 8P phthalates. The file is issued against the serial number on the data plate, so a hire company can pass it to a client or a venue.

CertificateCertificateCertificateCertificateCertificate

05

Narrow-Site Setup

The bag moves on a sack barrow, and two people lift it over a step. A set-up takes a quarter of an hour: unroll, fit the tube, inflate, anchor, wipe the bed and check the netting.

On grass every corner and mid-span loop takes a stake. On patio, decking or tarmac, use water ballast or sandbags, because a stake through a paving joint cracks the slab.

Get A Quote Now — send the theme, the gateway width and the voltage, and we reply with the quotation and packing details.

06

Narrow Site Questions

Q: Which standards does the Small Jungle Party Multiplay Bounce Castle meet?

A: EN 14960-1:2019, SCT, the RPII inspection report, and the ISO 9001, 14001 and 45001 systems.

Q: How wide is the packed case?

A: 103 cm, so a 110 cm gate opening is enough. The case stands on its side and moves on a sack barrow.

Q: What is the platform height?

A: 1.4 m, with a single-lane slide from the platform to the exit at the far end.

Q: Which voltage is available?

A: 220-240 V at 50 Hz or 110 V at 60 Hz, with the plug type confirmed at order.

Q: Can a spare panel be ordered later?

A: Yes. Panel sets are quoted separately, and the stored print file keeps a replacement consistent.

Send Inquiry
Contact Info
Send us your detailed inquiry about Inflatable Bouncy Castles,Inflatable Sports Games,Inflatables Accessories, wholesale orders, customized projects or OEM requirements. Our professional team will reply with quotation and solution quickly.
X
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
RejectAccept