Leisure Activities® offers the Standard Football Multiplay Bounce Castle for commercial purchase, combining a bounce area, climbing section and single-lane slide in a football-themed inflatable structure. Available in stock with 110V and 220–240V blower options, this model provides a ready-to-ship choice for rental operators, sports clubs, event organizers and indoor play venues seeking football-themed inflatable entertainment without a custom production wait.
Leisure Activities® Standard Football Multiplay Bounce Castle is available for bulk sourcing and individual commercial orders, with stock configurations designed to shorten procurement lead times. Its football-themed layout combines a goalkeeper entrance, trophy graphics, climbing access, a raised bounce platform and a single-lane slide within a 4.0 × 4.6 m footprint. Standard printed versions are offered in two voltage configurations, while custom club crests, sponsor graphics and colour changes can be arranged through made-to-order production.
01
Main Features
The unit combines a bounce bed, a climb section and a single-lane slide in one shell. A goalkeeper figure sits above the entrance, trophy panels run along the walls, and the print is applied before sewing so the figures line up across the seams.
The rectangular footprint lines up along a wall and leaves a walkway on one side. The 3.0 m height clears most sports halls when the blower tube and lights are taken into account.
Item
Specification
Inflated size (L x W x H)
4.0 x 4.6 x 3.0 m / 13 x 15 x 10 ft
Unit weight
114 kg / 251 lb
Packed size
131 x 90 x 75 cm / 52 x 35 x 30 in
Outer material
17 oz PVC vinyl, NFPA 701-2
Internal material
9 oz PVC, 8P phthalate-free
Play elements
Bounce bed, climb section, single-lane slide
Platform height
1.5 m / 60 in
Theme
Football print, goalkeeper figure, trophy panels
Blower
1.5 HP constant air, voltage to order
Anchor points
Webbing loops, corners and mid-span
Assembly crew
Two people, about 20 minutes
Packed with
Blower, stakes, repair kit, manual
Optional
Spare slide panel, sandbag set, badge panel
MOQ / lead time
1 piece / ex-stock or 30 days
Warranty
1 year limited on seams, blower 1 year
02
Platform and Climb
On the Standard Football Multiplay Bounce Castle the platform sits at 1.5 m. It is high enough to make the slide worth queuing for, and low enough that an adult at the side can see the top of the climb face.
Climb steps are moulded into the side wall, and the platform edge carries a reinforced strip where feet land. The deck is a stitched panel that can be replaced without opening the roof.
03
Workshop and Output
The Qingdao workshop covers 12,000 m² on a 70-acre site, with separate bays for material storage, cutting, printing, welding, sewing, inspection and export packing.
Output is about 1,000 inflatables a month, produced by more than 170 staff and over 100 heavy-duty sewing machines. Stock shells are cut from the same line as made-to-order units.
04
Quality Documents
Stock and made-to-order units are built under ISO 9001, ISO 14001 and ISO 45001. Material documents cover NFPA 701 method 2 and 8P phthalates.
The product file of Standard Football Multiplay Bounce Castle can include EN 14960-1:2019 compliance, an SCT product certificate and an RPII inspector report. Documents are issued against the serial plate and sent as a PDF set before shipment.
05
Stock and Dispatch
Stock is held in 220-240 V and 110 V versions. A stock unit leaves about 10 days after payment; a made-to-order shell takes 30 days, and a printed crest 45 to 60 days.
Configuration
Stock status
Dispatch
Football print, 220-240 V
Subject to current stock
About 10 days
Football print, 110 V
Subject to current stock
About 10 days
Custom colour or crest
Made to order
45-60 days
Consolidated order
Confirmed per order
Adds transit time
06
Order Options
A club crest or sponsor mark is printed on the side wall or the front panel. A colour change or a new crest moves the order from stock to the made-to-order schedule.
Warehouses in China, the United States, the United Kingdom and Belgium support delivery, and a stock unit can be quoted from the nearest location when the quantity allows.
Get A Quote Now — send the voltage and the print direction, and we reply with stock status and the quotation.
07
Stock and Print Questions
Q: Which quality documents come with a stock unit?
A: The ISO certificates, the EN 14960-1:2019 file, the SCT certificate and the RPII report, all matched to the serial plate.
Q: Can the football print on the Standard Football Multiplay Bounce Castle be changed on a stock shell?
A: Yes, but a colour change or a club crest moves the order to the made-to-order schedule with a 45 to 60 day lead time.
Q: What ceiling height is needed indoors?
A: The shell is 3.0 m, and the blower tube and light fittings sit above it. Measure to the lowest obstruction rather than to the ceiling boards.
Q: Can the unit ship with other models from a warehouse outside China?
A: Consolidated orders are quoted from the actual case sizes, and the nearest warehouse is used when stock allows.
Q: How many children fit on the unit?
A: Capacity is calculated from the clear play area and printed on the data plate. Keep the platform to one child at a time.
Send us your detailed inquiry about Inflatable Bouncy Castles,Inflatable Sports Games,Inflatables Accessories, wholesale orders, customized projects or OEM requirements. Our professional team will reply with quotation and solution quickly.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy