Designed for commercial rental operations and event venues, the Cowhide SRC Anti-Slip Safety Shoes by Leisure Activities® converts standard soccer kicking into an interactive target game. This 2.7m x 5.8m x 4.9m (9ft x 19ft x 16ft) continuous-air inflatable features a vertical hook-and-loop scoring face that holds felt-covered balls upon impact, offering a structured activity for a wide range of participants without complex rules or slow rotation.
Engineered for frequent deployment in rental fleets, training centers, and corporate event activations, Leisure Activities® provides straightforward setup and reliable field operation. The Cowhide SRC Anti-Slip Safety Shoes utilizes printed scoring sections for individual accuracy challenges or organized group play.
Weighing 92 kg (204 lbs) and packing down to a 115cm x 96cm x 64cm bundle, the structure is constructed from heavy-duty commercial PVC vinyl with reinforced double-thread stitching. Produced under ISO-certified quality management frameworks, it offers operators an adaptable equipment asset backed by a 30-day factory production schedule.
01
Key Technical Parameters
Feature / Parameter
Operational Details
Product Model
Cowhide SRC Anti-Slip Safety Shoes
Brand / Manufacturer
Leisure Activities®
Inflated Dimensions
2.7m x 5.8m x 4.9m / 9ft x 19ft x 16ft (L x W x H)
Unit Weight
92 kg / 204 lbs
Packed Storage Dimensions
115cm x 96cm x 64cm / 45” x 38” x 25”
Inflatable Body Material
Commercial-grade PVC vinyl
Target Grid System
High-density loop receiver fabric with digital section printing
Seam Construction
Double-thread lock-stitching at primary load points
Air Blower Requirement
1 x 1.0 HP continuous electric air blower
Anchoring Hardware
Perimeter steel D-rings with heavy-duty webbing straps
Safety & Testing Documentation
EN 14960-1:2019 standard compliance; SCT Certificate and RPII Inspection Report (specific report numbers and inspecting bodies provided upon request)
Factory Systems
ISO 9001, ISO 14001, ISO 45001 certified manufacturing
Procurement Terms
MOQ: 1 Piece
Production Lead Time: 30 Days
Payment: Bank Wire (T/T)
02
Structural Design & Operating Limits
Impact-Grip Target Fabric: The oversized dart face uses industrial loop fabric that catches felt-covered balls on contact, preventing bounce-backs and providing instant score identification.
Rear Support Frame: An integrated A-frame geometry supports the vertical target wall, maintaining upright stability during repeated ball impacts.
Weather-Resistant Outer Shell: Constructed from abrasion-resistant PVC vinyl designed for outdoor event setups under direct sunlight and variable moisture conditions.
Reinforced Anchor Points: Structural webbing straps with steel D-rings are stitched along the base to secure the unit against wind loading when staked or weighted.
Wind & Weather Operating Limits:Maximum operational wind speed: 24 mph (38 km/h / Beaufort Force 5). Discontinue operation, deflate, and store the unit immediately if wind gusts exceed this threshold.Do not operate outdoors during severe weather, lightning storms, or heavy rain.
03
Pre-Use Inspection, Setup & Takedown
Pre-Use Inspection Protocols
Before inflating or opening the attraction to Cowhide SRC Anti-Slip Safety Shoes users, operators must conduct a visual and physical check:
Fabric & Seams: Inspect the PVC shell, target grid, and seam stitching for punctures, tears, or loose threads.
Anchor Hardware: Check all steel D-rings, webbing straps, ground stakes, and anchor lines for wear or mechanical damage.
Electrical & Blower: Verify the 1.0 HP blower casing, power cord, air intake screen, and inflation tube cinch strap are secure and intact.
Field Deployment Steps
Unrolling: Position a protective ground tarp on level terrain cleared of sharp debris, then unroll the inflatable facing the designated kick-off area.
Inflation: Connect the air sleeve to the 1.0 HP blower using the built-in cinch strap, confirm all deflation zippers are closed, and turn on the motor. Full inflation takes 3 to 5 minutes.
Anchoring: Fasten ground stakes or heavy sandbags to every perimeter D-ring before allowing play.
Takedown & Packing: Switch off the blower, open quick-deflation zippers, fold inward, and roll tightly into the PVC transport bag for vehicle transport.
04
Maintenance Storage
Target Surface Care: Remove surface dust from the target fabric using a soft-bristle brush. Clean the PVC body using warm water and mild soap; avoid harsh chemical solvents.
Drying Protocol: Ensure all vinyl panels and internal seam channels are completely dry prior to packing to prevent mold formation during storage.
Warehouse Storage: Store packed units off damp concrete floors on pallets or warehouse racking in a cool, dry indoor environment.
05
Warranty Coverage
Commercial Ordering Terms: Orders are processed via Bank Wire transfer (T/T) with a 50% deposit prior to production, and the remaining 50% balance plus freight due prior to shipment.
1-Year Limited Warranty: Includes a 1-year limited warranty protecting against manufacturing defects on the inflatable structure, along with a separate 1-year warranty on the continuous air blower.
06
Operator FAQs
Q: What type of balls work with this inflatable target?
A: The Cowhide SRC Anti-Slip Safety Shoes requires felt-covered soccer balls engineered specifically to adhere to hook-and-loop target surfaces. Standard synthetic leather or rubber match balls will not stick to the target grid.
Q: How does the target fabric perform over extended commercial use?
A: The target face uses commercial-grade loop material stitched directly into the main PVC frame. It retains functional adhesion over regular operational cycles and can be maintained by periodically brushing away surface dirt.
Q: Can we order custom colors or add facility logos to the target frame?
A: Yes. Leisure Activities® provides OEM customization services. Buyers can specify alternative PVC colorways, custom frame dimensions, or screen-printed brand logos on the target border and side panels.
Send us your detailed inquiry about Inflatable Bouncy Castles,Inflatable Sports Games,Inflatables Accessories, wholesale orders, customized projects or OEM requirements. Our professional team will reply with quotation and solution quickly.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy